It is important to follow these procedures when sealing a private dock or a dock at the marina. Always let the dock dry for three to twenty-four hours before applying any coating or sealant. You cannot put a seal coat over on top of moisture or wet wood.

Mask off boats, shrubbery, masonry, foliage with drop cloths or large sheets of cardboard. When using an airless sprayer use a 0.014-inch fine tip at about 250 to 500 PSI. if you are using a lower pressure sprayer or pump sprayer that is okay, but get in close. Apply water repellant, coating or sealant to railings, spindles, etc. first. Then move to the floor of the dock, deck or pier. Always work with the grain spraying in that direction. Use liberal portions of coating.

Be sure to brush out any puddles or drips aiming for smooth uniform application. Make sure whatever product you end up choosing is a preservative and not just a