Compiling a Free BSD Kernel

Ever since my college days, I always loved to have my own compiled kernel. It gave me that special feeling of "my machine is better than yours". I am sure each time my new kernel boots up the feeling I have is is the same as what Super Man has when he bashs up the bad people.

A custom kernel boots up the system faster, it takes up lesser memory space and one can install drivers for hardware not supported by a default kernel. Besides these benefits, a custom kernel serves as an interesting conversation topic with geeks. Just ask them "What is your kernel size ?". This would keep the Geek busy for sometime where he would explain all the great things he did to the kernel options to optimize his box.
If you happen to be a geek yourself, this is a great question to put forward to those lowly Nubies. They'll never trouble you with stories of their nephew or kid sister after this :-D

Before we get down to compiling our own kernel, it is a wonderful idea to backup the present kernel.
# cd /boot
# cp -pvr kernel kernel.orig

The original generic kernel is now stored as kernel.orig. In case the kernel does not boot (which has happened with me many times) boot up with the generic kernel and try again. Booting any other kernel is simple. At the boot time goto to the boot prompt and simple say "boot kernel.orig" and the default kernel would boot up.

The kernel sources are located in the /usr/src/sys directory. If not installed, the kernel sources can be installed with the following commands. First insert the FreeBSD install CD in your CD drive. 

# mount /cdrom
# mkdir -p /usr/src/sys
# ln -s /usr/src/sys /sys
# cat /cdrom/src/ssys.[a-d]* | tar -xzvf 
 -
Then go to the director where the configuration files are located.

#cd /sys/i386/conf

In this directory the GENERIC kernel configuration file is located. Copy this file and it as your custom name.

#cp -pvr GENERIC BABYBSD
# vi BABYBSD

First change the ident value from GENERIC to BABYBSD (or whatever name you prefer). I have given my sample configuration file at the end of this article. The options are quite easy to understand and a good starting point would be the FreeBSD Handbook which has documented most of the kernel options.
You can also go to a shell and run the command #make LINT in this directory which would create a file called LINT which has all the options supported by the kernel listed.

After this stage just run the following commands


#/usr/sbin/config BABYBSD
#cd ../compile/BABYBSD
#make depend
#make
#make install

Please note that you must be root to run the make install. Reboot and the kernel should boot with your shining new kernel. :-)




# My Sample Kernel Configuration File for FreeBSD/i386

machine i386
cpu

I586_CPU
cpu

I686_CPU
ident

BABYBSD


options SCHED_4BSD

# 4BSD scheduler
options INET

# InterNETworking
options INET6

# IPv6 communications protocols
options FFS

# Berkeley Fast Filesystem
options SOFTUPDATES

# Enable FFS soft updates support
options UFS_ACL

# Support for access control lists
options UFS_DIRHASH

# Improve performance on big directories
options MD_ROOT

# MD is a potential root device
options NFSCLIENT

# Network Filesystem Client
options NFSSERVER

# Network Filesystem Server
options NFS_ROOT

# NFS usable as /, requires NFSCLIENT
options MSDOSFS

# MSDOS Filesystem
options NTFS
options CD9660

# ISO 9660 Filesystem
options PROCFS

# Process filesystem (requires PSEUDOFS)
options PSEUDOFS

# Pseudo-filesystem framework
options GEOM_GPT

# GUID Partition Tables.
options COMPAT_43

# Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4

# Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE

# ktrace(1) support
options SYSVSHM

# SYSV-style shared memory
options SYSVMSG

# SYSV-style message queues
options SYSVSEM

# SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug

# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug

# output. Adds ~215k to driver.
options ADAPTIVE_GIANT

# Giant mutex is adaptive.

device apic

# I/O APIC

# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci

# Floppy drives
device fdc

# ATA and ATAPI devices
device ata
device atadisk

# ATA disk drives
device atapicd

# ATAPI CDROM drives
options ATA_STATIC_ID # Static device numbering


# SCSI peripherals
device scbus

# SCSI bus (required for SCSI)
device ch

# SCSI media changers
device da

# Direct Access (disks)
device cd

# CD
device pass

# Passthrough device (direct SCSI access)
device ses

# SCSI Environmental Services (and SAF-TE)



# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc

# AT keyboard controller
device atkbd

# AT keyboard
device psm

# PS/2 mouse

device vga

# VGA video card driver

device splash

# Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER

# support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp

# support several AGP chipsets

# Floating point support - do not disable.
device npx

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer






# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus

# MII bus support
device rl

# RealTek 8129/8139

# Wireless NIC cards
device wlan

# 802.11 support

# Pseudo devices.
device loop

# Network loopback
device mem

# Memory and kernel memory devices
device io

# I/O device
device random

# Entropy device
device ether

# Ethernet support
device sl

# Kernel SLIP
device ppp

# Kernel PPP
device tun

# Packet tunnel.
device pty

# Pseudo-ttys (telnet etc)
device md

# Memory "disks"
device gif

# IPv6 and IPv4 tunneling
device faith

# IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf

# Berkeley packet filter

# USB support
device uhci

# UHCI PCI->USB interface
device ohci

# OHCI PCI->USB interface
device ehci

# EHCI PCI->USB interface (USB 2.0)
device usb

# USB Bus (required)
#device udbp

# USB Double Bulk Pipe devices
device ugen

# Generic
device uhid

# "Human Interface Devices"
device ukbd

# Keyboard
device umass

# Disks/Mass storage - Requires scbus and da
device ums

# Mouse

# Specific to my Machine
device atapicam # for CD Writer to be detected by K3B and other CD writing software
device sound

# To Enable Sound
device "snd_ad1816"
device "snd_als4000"
device snd_cmi
device "snd_cs4281"
device snd_csa
device "snd_ds1"
device "snd_emu10k1"
device "snd_es137x"
device snd_ess
device "snd_fm801"
device snd_gusc
device snd_ich
device snd_maestro
device "snd_maestro3"
device snd_mss
device snd_neomagic
device "snd_sb16"
device snd_sbc
device snd_solo
device "snd_t4dwave"
device "snd_via8233"
device "snd_via82c686"
device snd_vibes
device snd_uaudio
device pcii
device acpi
device acpi_asus
device acpi_video

device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus

options DEVICE_POLLING
options HZ=1000
options PERFMON
device apm_saver # Requires APM

options AUTO_EOI_1
options AUTO_EOI_2

options VESA


Amarjyoti Krishnan - EzineArticles Expert Author