Learning IPv6 is paramount in your efforts to pass the BSCI exam and go on to earn your CCNP, and it's going to help in your real-world networking career as well. IPv6 can be confusing at first, but it's like anything else in Cisco or networking as a whole - learn one part at a time, master the fundamentals, and you're on your way to success. In today's article we're going to take a look at IPv6 address types.

In IPv4, a unicast address is simply an address used to represent a single host, where multicast addresses represent a group of hosts and broadcasts represent all hosts.

In IPv6, it's not quite that simple. There are actually different types of unicast addresses, each with its own separate function. This allows IPv6 to get data where it's supposed to go quicker than IPv4 while conserving router resources.

IPv6 offers two kinds of local addresses, link-local and site-local. Site-local addresses allow devices in the same organization, or site, to exchange data. Site-local addresses are IPv6's equivalent to IPv4's private address classes, since hosts using them are able to communicate with each other throughout the organization, but these addresses cannot be used to reach Internet hosts.

Site-local and link-local addresses are actually derived from a host's MAC address. Therefore, if HostA has HostB's IPv6 address, HostA can determine HostB's MAC address from that, making ARP unnecessary.

Link-local addresses have a smaller scope than site-local. Link-local addresses are just that, local to a physical link. These particular addresses are not used at all in forwarding data. One use for these addresses is Neighbor Discovery, which is IPv6's answer to ARP.

You can identify these and other IPv6 addresses by their initial bits:

001 - Global address

(first 96 bits set to zero) - IPv4-compatible address

1111 1111